It is Thursday and we continue our look turf equipment. When most people see that lush green lawn they may not consider that erosion control is an important part. If that grass seed is not held in place then problems can occur. So off we go with erosion control.

Starting with bark blowers

BB-705 Bark Blowers – 4.5 cubic yard hopper capacity

The BB705 provides the ideal entry level option to the truck mounted models. The BB705 has found its perfect niche integrating the technology and capabilities of the truck-mounted series with the accessibility and operational ease of the trailer-mounted units.

FEATURES AND BENEFITS

• 4.5 cubic yard hopper capacity, upgraded floor drive shaft, and increased running gear capacity allow for blowing a greater variety of bulk material that are heavier
• Tier II Kubota 71hp engine increasing fuel efficiency and increasing hp to the blower
• Advanced couplings replicating the truck mounted system, more robust hose reel, and new wiring harness relocated from high heated areas
• Greater accessibility discharge outlet
• Air cleaner has been placed to draw in cooler air, engine exhaust was reconfigured and engine cabinet door was perforated to minimize heat build-up inside the cabinet
• Reduces material cost from 20% to 40% by breaking up material clumps and producing an even mulch spreading pattern, with fine particles on top
• Remote controls allow operator to control power and material flow from an operating distance
• Internal engine access panel, removable from inside the hopper, enables two-sided access to the engine compartment for inspection and maintenance
• Rear hopper inspection platform, with ladder, provides convenient operator visibility into the hopper
• Standard 150’ hose comes with the unit, optional 50’ sections available
• Standard hydraulically powered rear mounted hose reel
• Blower, airlock and hydraulic functions are exclusive to FINN design

WHO USES THE BB-705 BARK BLOWER?

The BB705 Bark Blower is perfect for the mid-size mulching projects such as residential and commercial mulch beds, slopes, public gardens, playgrounds, amusement parks, sports field overseeding, erosion control/berms, mall interiorscapes, and other applications that require precise placement of bulk materials. Perfect for the hard to reach areas.

With the versatile BB705 you can do professional quality mulching, slopes, erosion control, overseeding, soil/compost, aggregate installation, salt/sand spreading and a number of other profitable applications. Mulch can be applied on virtually any terrain, even in wet conditions.

As the world leader for over 70 years in the design and manufacture of innovative, quality equipment for the green industry, FINN is committed to your complete satisfaction.

Maybe your needs are more in line for a hydroseeder.

T-400 HydroSeeder – 3,600 Gallon Working Capacity Tank

The FINN T400 is the newest, powerhouse addition to the legendary Finn Hydroseeder family. As the largest, most robust Hydroseeder, these units are designed to meet the needs of large-scale jobsites and demanding seeding applications. The new conveniences, greater versatility and increased operator efficiencies are unmatched in the industry delivering the utmost in performance and productivity. This outstanding 3,600 gallon working tank capacity offers a great value for your investment.

FEATURES AND BENEFITS

• 3,600 gallon working capacity tank
• Exclusive 2-valve straight line discharge piping improves slurry flow resulting in higher output, pressure and greater slurry discharge distance
• Optimum mixing capabilities featuring twin hydraulically controlled paddle agitation, liquid recirculation and a hefty hydraulic system
• Features the time-tested and field proven “clump” technology integrating a single shaft design of the clutch/pump to maxiize mechanical efficiency
• Agitator and pump are independently driven allowing complete mixing of the slurry without pump operation enhancing mechanical longevity and flexibility during operation
• A larger slurry pump coupled with a turbo charged engine provides more pump pressure and output resulting in faster slurry discharge and distance
• Relocated discharge boom to a more centralized location increasing operator comfort and rear sweeping pattern
• Tier III engine control panel integrates into the discharge boom mount with a engine start/stop; throttle switch; and pump control putting the controls at the operators finger tips
• Newly designed loading hatch with a larger opening and curbside hinged lid enables more efficient loading and less spillage of material
• Operator platform and access ladder are perfect for improved comfort and accessibility
• Relocated fill port for sump filling and a heavy-duty suction line gate valve
• Discharge distance up to 230 feet from end of the tower
• Optional remote control for engine throttle and pump functions allowing for true one-man hose operation
• Optional low profile pivoting hose reel with 3 locking positions enabling curbside, 45 degrees and rear hose discharge

WHO USES THE T-400 HYDROSEEDER?

The T400 HydroSeeder is perfect for the large hydroseeding projects on mine reclamation, highways, commercial and industrial sites and more.

With the versatile T400 you can do professional quality hydroseeding, fiber mulching, fertilizing, straw tacking, foliar feeding, dust control, remote watering and a number of other efficient, cost effective and profitable applications. The T400 HydroSeeder readily doubles as a first response firefighter, portable wash-down rig or mini water carrier. It also has the power to mix and apply a wide variety of liquid, powdered and solid consumables for landscape, soil building, erosion control, cleaning, and industrial uses.

As the world leader for over 70 years in the design and manufacture of innovative, quality equipment for the green industry, FINN is committed to your complete satisfaction.

An erosion control machine for laying  down a layer straw.

B-260 Straw Blowers – Shreds and blows 20 tons of straw per hour

Designed for the maximum in performance and operator convenience, the B260 Straw Blower is the standard by which straw and hay mulching equipment should be measured. With the highest material capacity in the industry (up to 20 tons/hour), the B260 will handle the toughest material, yet continue to perform at high levels of both production and dependability. With more than 70 years in the business, we know that mine reclamation, highway construction, and large commercial sites demand a machine that’s up to the task.

FEATURES AND BENEFITS

• Shreds and blows 20 tons of straw per hour, while providing maximum operator conveniences
• John Deere Tier II turbo 115 hp diesel engine, coupled with heavy-duty over-center clutch to provide smooth, high torque power to the blower
• All controls are easily accessed from the operators seat, including the new digital engine information display
• Discharge tube has been designed to provide superior air flow, providing maximum discharge distance
• Reliable operator-controlled hydraulic power feed system designed for performance
• Ideal solution for proper and precise mulching
• Provides soil moisture retention and protection against wind damage
• Discharge head has a 355 degree rotation and 60 degree vertical travel with gas spring counter balance
• Hydraulic powered conveyor chain with variable speed control. Tray includes an adjustable elevation and length to meet the bed of the supply vehicle

WHO USES THE B-260 STRAW BLOWER?

The B260 Straw Blower is perfect for the largest mulching projects such as mine reclamation, highway construction and large commercial sites. With the versatile B260 you can do a number of applications including seed protection, soil stabilization, erosion control and straw mulch applications.

As the world leader for over 70 years in the design and manufacture of innovative, quality equipment for the green industry, FINN is committed to your complete satisfaction

Maybe an MTS is right for you, a Material Transfer System

MTS – Material Transfer System

It’s Time To Bury Your Shovel!
FINN’s product line just got larger…and your work just got easier with the launch of the FINN MTS. A new product category for FINN, the MTS offers a proven labor savings over the old “shovel and sweat” method by:

• Delivery and placement of soil, aggregate, bark mulch, compost, sod and a variety of other bulk materials without the back-breaking shoveling.
• Integrated vacuum to remove leaves and debris.
• Decrease manual labor.
• Decrease job times.
• Increase productivity and profits.
• It’s time to bury your shovel!

How it works
The FINN MTS has a 15 cu. yd. trailer capable of hauling, storing and delivering bulk materials, from sand and aggregate to bark mulch and compost or virtually any pallatized material. A wide rear access area allows for quick loading and offloading of materials, while dual discharge conveyors enable loading of wheelbarrows from either side. A multi-purpose vacuum picks up a wide variety of materials, which are conveniently deposited into the enclosed trailer.

Dramatically Cut Job [ top ]

Times Loading wheel barrows and raking leaves take their toll on your workforce’s productivity and increase the time needed to complete jobs. Eliminate them with the FINN MTS.

Loading wheel barrows and raking leaves take their toll on your workforce’s productivity and increase the time needed to complete jobs. Eliminate them with the FINN MTS.

• Fill a wheelbarrow in 4 seconds.
• Single handedly move and place 5 cu. yds. of bark mulch, in less than 40 minutes, while your competition spends 3-4 hours for a similar job.
• Dump 15 cu. yds. of material in 60 seconds.
• Pick up leaves and yard debris at a rate much faster than manual labor.

Whatever the job, be it commercial or residential, you’ll find countless ways to utilize a FINN MTS. From removing leaves and grass clippings to filling wheelbarrows with soil, bark mulch or aggregate to unloading palleted materials, the FINN MTS is the most versatile transfer machine on the market. When you’re not using it for landscaping projects, it serves as a multi-purpose trailer to conveniently haul materials and store tools needed on the jobsite.

	Easy Operation A simple flip of the switch engages the side conveyors, transferring material out of the discharge door and into an awaiting wheelbarrow. What used to take several minutes and back-breaking labor – to fill wheelbarrows with a shovel – now takes only 4 seconds. The shovel is eliminated from the process.
	3 Point Unloading The dual reversible floor conveyor system provides 3 unloading points. The side conveyor delivers material out of the discharge doors located on either side of the machine – curbside or roadside – for increased flexibility and convience on any jobsite. The main floor conveyor allows materials to be simply dumped out of large rear door. The main conveyor also assists in loading materials, such as paver blocks, plants and trees, and palletized items.
	Powerful Multi-Purpose Vacuum Standard with the FINN MTS is a powerful multi-purpose vacuum that effectively cleans up grass clippings (wet or dry), as well as bark mulch and other jobsite debris. The long, stretchable intake hose enables operation in a large diameter area around the unit.
	Tool Storage Built right into the chassis of the trailer is a handy tool storage space. The space is designed to provide easy access to the common tools you need on the jobsite, such as rakes, push brooms, posthole diggers and pitch forks. Heavy-duty latches keep the storage door closed and tools secure during transport.

Low Operating Cost [ top ]

Since 1935 FINN has set the standard in contractor grade landscape equipment. From Bark Blowers to Straw Blowers to Hydroseeders, FINN machines are built with the quality components to keep productivity and profitability at their highest.

 

Compared to other products on the market, the FINN MTS is designed with features and components that prolong working life and reduce maintenance. FINN eliminated parts wherever it made sense, to ensure peak performance and cut out costly repairs. In addition, the MTS is constructed without belts or chains, so you’re free from the troubles associated with them.

	Designed for Heavy Loads Steel Chasis – With an empty weight of 6,800 pounds, the MTS is light enough to be towed by most 3/4-ton trucks, yet the robust steel trailer chassis provides a strong foundation to handle the heaviest loads.
	Increased Material Capacities Panel Construction – The aluminum panel and steel post construction provide durability for demanding jobsite environments in a lightweight design, which minimizes impact on payload capacity.
	Maximize Material Flow Sloped Design – The unique sloped design on the front panel helps maximize material flow, providing continuous feed to the reversible floor conveyors and, in turn, to the jobsite. This design eliminates the need for an auger, as found on competitive systems, meaning less parts to maintain and service.
	Eliminate Belts and Chains Hydraulics – Electronically controlled hydraulics eliminate the need for troublesome chains and belts and help ensure peak performance, while reducing noise and maintenance. Also, the system is driven by only two hydraulic motors, further saving on maintenance and service concerns.
	Improve Fuel Economy Engine – A single 25-horsepower Kohler Command Pro gasoline engine powers both the vacuum and material transfer conveyor system translating to fewer moving parts and less maintenance concerns. And, the efficient operation provided by a single engine significantly improves fuel economy.

This entry was posted on Thursday, November 10th, 2011 at 7:41 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.