(307) 631-2810
contact@agtvnetwork.com

September Equipment Highlight

It is Tuesday September 27 and time for another edition of Equipment Highlight. Today we look at cattle feeders and waterers, have to keep the herd fed and watered.

 

All 3C Cattle Feeders:
-Are chain-driven
-Have a 6″auger
-Have a patented digital counter that measures within 2lbs for every 100lbs
-Are the width of a pickup bed and do not extend above the cab unless larger than 2,000lb capacity
-Have a 4″ sight hole for rear visibility
-Have a tough metal waterproof cover
-Feature a solid metal frame and feeder
-Contain heavy-duty wiring
-Have vibrators available for light, fluffy feed
-Must be greased every 50 hours of use for optimum performance

Click here to view a full table

 

 

 

All 3C Creep Feeders have a 2-ton capacity. One man can fill it and one man can set it up. Each 3C Creep Feeder has easy fold-up gates that lock in position, a removable tongue and a sliding lid. 3C Creep Feeders measure 8’2″ wide and 7’3″ tall with gates folded up.

 

 

Deer and Game Feeding Equipment
300 lb. Capacity
Trip Hopper Jr.
Go Bulk with Your Feeding and Save $$$
Deer and Game Feeding Equipment
Paddleveyor attached to feeder for 
filling Deer and Game Feeders

FEED BULK AND BE ABLE TO KNOW THE EXACT AMOUNT OF FEED YOU ARE FEEDING
Feed Cubes Any Size or Alfalfa Hay Cubes

Trailer Model Feeder
Click on image for a larger version.

5ft. wide 6ft. long 7ft. high

Trailer Model is Completely Self-contained

The trailer model feeders hold 3000lbs. of 3/4 inch cubes. These feeders will feed in piles at 10 ft. intervals of in a steady trail of feed. You can set the feeder to dump from 1 to 8 lbs. per pile. These feeders are capable of handling cubes, any size, ground feed of any combination thereof.
The feeder is very accurate, so why guess at how much you feed.
The feeders are made of heavy gauge steel and have a 2 inch ball hitch with bulldog jack. They come equipped with 8 ply nylon 15 inch flotation tires.

 


 

TAKE THE LABOR OUT OF YOUR FEEDING

AND

SAVE TIME      SAVE$$$$$

Truck Model Feeder Mounted In Pickup BedTruck Model Feeder Mounted Across A Flatbed
Click on image for a larger version.
These truck model feeders may be mounted in the back of a pickup, or they can be mounted across a flatbed. All of these feeders work the same way. The trailer is powered by the small wheel being engaged against the ground wheel. The truck model feeder is powered by a 12 volt motor that runs off the truck battery. These are not starter motors. These 12 volt motors are Constant Duty and are C-Face bolted to an oil bath gear reducer. They run for power and not speed.
All wiring, switch and the complete counter assembly come with each feeder.
Click on the pictures below to see more information on the Trailer models,  Truck ModelsTrip Hopper Jr. or the Deer and Game Feeding Equipment

Information on Trailer Model FeedersInformation on Truck Model FeedersInformation on Trip Hopper Jr.Click here to see Deer and Game Feeding Equipment
 

If you are a round bale feeder then here is an option.alv

 

 

 

R5000 Round Bale Craddle

Placeholder Image

• Designed as horse feeders or cattle feeders
• Easy load design
• No tractor necessary to load round bale into the round bale feeder.
• Open top prevents horses from rubbing off mane
• Round bale feeder comes in 5 parts that bolt together
• Bale cradle is 36″ high, 73″ long, 52″ wide
• Square tubing on frame is 1″x1″ and the round inner bars are 1″ round

***This bale cradle is designed to hold round bales that are 4′ wide by 4′ 5′ or 6′ tall. It will not hold a 5′ wide bale!***120′ X 200′ Riding Arena w/ Utility Panel. This arena package includes delivery!

Delivered price available to most of the lower 48 states

R1000 Round Bale Feeder

Placeholder Image

 

  • Height – 42″ cattle and horse feeder
  • Diameter – 7.5′ round bale feeder
  • Skirt – 14″/16-gauge steel
  • Ends – 1.5″ x 1.5″ angle iron
  • Sections per feeder – 3
  • Bolts – 3/16″ carriage head w/ nuts
  • Tubing – 1″ square

R2000 Round Bale Feeder

Placeholder Image

 

  • Height – 42″ cattle and horse feeder
  • Diameter – 7.5′ round bale feeder
  • Ends – 1.5″ x 1.5″ angle iron
  • V-Leg Sections – 3
  • Braces – 3/4″ Square
  • Bolts – 3/16″ carriage head w/ nuts
  • Tubing – 1″ square

R3000 Round Bale Feeder

Placeholder Image

 

  • Height – 42″ cattle and horse feeder
  • Diameter – 7.5′ round bale feeder
  • Ends – 1.5″ x 1.5″ angle iron
  • Sections per feeder – 3
  • Bolts – 3/16″ carriage head w/ nuts
  • Braces – 3/4″ spuare tubing
  • Tubing – 1″ square

R4000 Round Bale Feeder

Placeholder Image

 

  • Height – 42″ cattle and horse feeder
  • Diameter – 7.5′ round bale feeder
  • Skirt – 14″-gauge steel
  • Ends – 1.5″ x 1.5″ angle iron
  • Sections per feeder – 3
  • Bolts – 3/16″ carriage head w/ nuts
  • Tubing – 1 1/2″ square

RBFH-101

Placeholder Image

 

  • Designed as horse feeders or cattle feeders.
  • Open top prevents horses from rubbing off mane
  • Round bale feeders have three sections and three skids.
  • Horse feeder is 32″ tall, 8′ diameter
  • Each section, of the round bale feeders, are composed of 1″ 16—gauge square tubing and 18–gauge sheet metal

BF004H Feeder

Placeholder Image

  • Horse feeder with 6-gauge sheet steel construction
  • Frame and skids: 1-5/8” round tubing
  • Tops: 32” wide
  • Bottoms: 28” wide
  • Depth: 10”
  • cattle feeder: 22” tall
  • horse feeder: 36” tall

Hay Rack Description

  • Height: 31”
  • Width: 35”
  • Frame: 1” square tubing
  • Base: 1.5” x 1.5” x 1/8” angle iron
  • Slant Bars: 3/4” round tubing

 

PBF1010 Feeder

Placeholder Image

  • Available in 5’ or 10’ lengths
  • 10” deep for large feed capacity
  • Rounded corners for better clean out
  • UV stabilized to prevent sun damage
  • Completely corrosion resistant
  • One 1-5/8” brace on 5’ model
  • Three 1-5/8” braces on 10’ model

BF112C Feeder

Placeholder Image

  • Available in horse or cow heights
  • Available in 4’, 8’, or 12’ lengths
  • 16-gauge sheet steel construction
  • Frame and skids: 1-5/8” round tubing
  • Tops: 32” wide
  • Bottoms: 28” wide
  • Depth: 10”
So some options for the feed, here are some for waterers

 

Feedlot Waterers

Note: Some models also available in 19″ height. 220v available on all models. Add $35.00 to list price if brass valve is requested. Add $40.00 to model for Walters constant flow. Discounts may apply for multi-unit orders. Please call for a quote (800)325-2380.
Page 1 of 4  –  1 2 3 4  Show All
Model 75 Electric
Model 75 Electric
Model 75 Constant Flow
Model 75 Constant Flow
Model 150 Electric
Model 150 Electric
Model 150 Constant Flow
Model 150 Constant Flow
Model 250 Electric
Model 250 Electric
Model 250 Constant Flow
Model 250 Constant Flow 
Model 400 Electric
Model 400 Electric
Model 400 Constant Flow
Model 400 Constant Flow
Model 310 Electric
Model 310 Electric 

The Model LB with Floatless Valve System features unmatched winter endurance for two to three head access. The entire tub of water is constantly and directly warmed by the wide column of ground heat that prevents freezing of the valve and plumbing, even with zero traffic. Cleaning is easy — lift out the tub, swirl the water and empty it out. The floatless valve requires clean, pressurized water (not dirty, rusty or high mineral content).

Model LB Waterer:
29″ D x 48″ H
Ship Weight: 105 lbs.
Model LB Floatless Valve System Livestock Waterer Fountain
Key:
1. Lid (extended non-use)
2. Model LB Waterer
3. Tub
6. 3” Polyurethane Insulation
8. Valve Guard
9. Floatless Valve
10. Support Rod
11. Quick Coupler & Adapter
12. Quick Coupler & Adapter
13. Ball Valve
14. Flexible Hose
15. Strainer & Flush Valve
16. Black Overlap Line
17. 33″ Base Tube
18. 1″ Polyethylene Waterline not included
Gallons: 18
Opening: 17.5”
Side Reach: 6.5”
Water Level: 2”-3” from top of tub
Drinking Heights: 20″ Maximum or less
Waterer Construction: 1/2” Polyethylene Plastic
Tub & Float Construction: 1/4” Polyethylene Plastic
Base Tube Construction:
• 3/16” Polyethylene Plastic
• 33” Tube – no insulation
• 59” & 85” Tubes partially insulated – 2” thick
Capacity:
• Dry Lot Beef: 200 Head
• Range Cows: 100 Head
Valve Option:
1/4″ Floatless Valve
Pressure Feed
Clean Water Only1/4” Orifice
Ballcock Thread
Max: 100 PSI = 10 GPM
Avg: 40 PSI = 5 GPM
The Model LB with Float Valve System features unmatched winter endurance for two to three head access. The entire tub of water is constantly and directly warmed by the wide column of ground heat that prevents freezing of the valve and plumbing, even with zero traffic. Cleaning is easy — lift out the tub, swirl the water and empty it out.
Model LB Waterer:
29″ D x 48″ H
Ship Weight: 105 lbs.
Model LB Float Valve System Livestock Waterer Fountain
Key:
1. Lid (extended non-use)
2. Model LB Waterer
3. Tub
4. 5 3/8” Polyethylene Float
5. 3/16” Cord and 3/8” Sleeve
6. 3” Polyurethane Insulation
7. Float Valve
10. Support Rod
11. Quick Coupler & Adapter
13. Ball Valve
14. Flexible Hose
16. Black Overlap Line
17. 33″ Base Tube
18. 1″ Polyethylene Waterline not included
Gallons: 18
Opening: 17.5”
Side Reach: 6.5”
Water Level: 2”-3” from top of tub
Drinking Heights: 20″ Maximum or less
Waterer Construction: 1/2” Polyethylene Plastic
Tub & Float Construction: 1/4” Polyethylene Plastic
Base Tube Construction:
• 3/16” Polyethylene Plastic
• 33” Tube – no insulation
• 59” & 85” Tubes partially insulated – 2” thick
Capacity:
• Dry Lot Beef: 200 Head
• Range Cows: 100 Head
Two Valve Options:
1/2″ HD Valve
Pressure Feed

1/2” Orifice
Inside: 3/4” NPT
Outside: 1 3/8” Bolt Thd.
Max: 80 PSI =18 GPM
Avg: 40 PSI =10 GPM
1″ HD Valve
Gravity Feed – Pond1” Orifice
1 1/4” NPT
Max: 20 PSICapacity may
be reduced!

 

 

Cattle Waterers

New!

8’ All Purpose Poly Waterer – that won’t freeze up

Item No. 40161 – With Lids
Item No. 40160 – Without Lids (for inside use or mild temperatures)

  • Floating Lids Save 80-90% on Heating Costs
  • Capacity 300 beef cattle, 150 dairy cattle.
  • Floating lids keep heat in during cold weather and keep water cooler in the summer.
  • Lids float freely on stainless steel rods.
  • Two heaters, one under each lid, keep the entire unit ice-free even in sub zero weather.
  • Valve is easily accessible – no tools required.
  • Drains at each end make waterer easy to clean.
  • Twelve concrete mounting points hold the waterer solidly in place.
  • Rib construction adds to it’s strength.
  • Floating lids help retard algae growth, and prevent cattle from splashing water out of the unit – eliminating ice build-up and mud.

Click to enlarge

AP-1 Waterer

Item No. 40220

  • Width 25-1/4”, Height 23-1/2”, Length 27”
  • Weight 60 lbs
  • Capacity 0-30 head
  • Patented floating lids save 85-90% on heating costs
  • Floating lids help extend the life of the heater by 2 to 3 times over open waterer models
  • Water stays cooler in the summer
  • Heat is contained during cold winter months
  • Special stops below floating lids make sure heater is always covered with water so valve line won’t freeze
  • Lids help retard algae growth
  • Outside drain makes it easy to clean waterer without getting hands wet
  • Includes submersible heater and heat tape

Click to enlarge

AP-10 Waterer

Item No. 40170

  • Width 24-3/4”, Height 27-1/2”, Length 40-1/2”
  • Weight 100 lbs
  • Capacity 80-100 head
  • Patented floating lids save 85-90% on heating costs
  • Floating lids help extend the life of the heater by 2 to 3 times over open waterer models
  • Water stays cooler in the summer
  • Heat is contained during cold winter months
  • Special stops below floating lids make sure heater is always covered with water so valve line won’t freeze
  • Lids help retard algae growth
  • Outside drain makes it easy to clean waterer without getting hands wet
  • Drain plug can be removed and water shut off on one side

Click to enlarge

E-20 Waterer

Item No. 40705

  • 1140 watts
  • 37”W x 28”H x 37”L
  • Weight 216 lbs
  • Capacity 0-250 head
  • Heavy-gauge steel construction
  • Use in fence line or open lots
  • Lids can be shut at night to save energy
  • One side can be shut down
  • Fast recovery valve
  • Spray on insulation for better R-value
  • Large access door for easy service
  • Powder coat paint

Click to enlarge

EEPC-1 Energy Efficient Poly Waterer

Item No. 40180

  • 120 watts
  • 19”W x 18-3/4”H x 24-1/4”L
  • Weight 38 lbs
  • Capacity 0-30 head
  • Patented floating lids save 85-90% on heating costs
  • Adjustable thermostat
  • 3 ft. heat tape
  • Spray on insulation for better R-value
  • Access doors on side and top
  • Side door is raised so debris can’t get in
  • Trough area below floating lid ensures heater is always covered with water so heater will not burn out

Click to enlarge

EEPC-2 Energy Efficient Poly Waterer

Item No. 40205

  • 120 watts
  • 21”W x 19”H x 33”L
  • Weight 54 lbs
  • Capacity 0-60 head
  • Patented floating lids save 85-90% on heating costs
  • Adjustable thermostat
  • 3 ft. heat tape
  • Spray on insulation for better R-value
  • Access doors on side and top
  • Side door is raised so debris can’t get in
  • Trough area below floating lid ensures heater is always covered with water so heater will not burn out

Click to enlarge

EEPC-10 Energy Efficient Poly Waterer

Item No. 39900

  • 200 watts
  • 25”W x 31-3/4”H x 31-1/2”L
  • Weight 87 lbs
  • Capacity 0-80 head
  • Patented floating lids save 85-90% on heating costs
  • Adjustable thermostat
  • 3 ft. heat tape
  • Spray on insulation for better R-value
  • Access doors on side and top
  • Side door is raised so debris can’t get in
  • Trough area below floating lid ensures heater is always covered with water so heater will not burn out

Click to enlarge

F-1 Waterer

Item No. 40855

  • 285 watts
  • 11-1/2”W x 18-1/2”H x 25-3/4”L
  • Weight 65 lbs
  • Capacity 0-30 head
  • Low, compact general utility waterer
  • Fast automatic water recovery
  • Use in fence line, box stalls or lots
  • Lids can be closed at night to save energy
  • Spray on insulation for better R-value
  • Powder coat paint

Click to enlarge

F-5 Waterer

Item No. 40630

  • 570 watts
  • 17”W x 26”H x 28”L
  • Weight 111 lbs
  • Capacity 0-50 head
  • Low, compact general utility waterer
  • Fast automatic water recovery
  • Use in fence line, box stalls or lots
  • Lids can be closed at night to save energy
  • Spray on insulation for better R-value
  • Powder coat paint

Click to enlarge

F-8 Waterer

Item No. 40655

  • 1140 watts
  • 19-1/2”W x 16”H x 72”L
  • Weight 176 lbs
  • Capacity 250 head
  • Designed for large commercial feedlots/dairies
  • Install in fence line or open lots
  • Recessed drain provides flushing action for automatic cleaning
  • Heavy-duty construction
  • Spray on insulation for better R-value
  • Powder coat paint

Click to enlarge

F-10 Waterer

Item No. 40680

  • 570 watts
  • 19-1/2”W x 28”H x 37”L
  • Weight 156 lbs
  • Capacity 125 head
  • Heavy-gauge steel construction
  • Use in fence line or open lots
  • One side can be shut down
  • Fast recovery valve
  • Large access door for easy service
  • Lids can be shut at night to save energy
  • Spray on insulation for better R-value
  • Powder coat paint

Click to enlarge

F-48

Item No. 40730

  • 855 watts
  • 19-1/2”W x 16”H x 49”L
  • Weight 128 lbs
  • Capacity 100 head
  • Designed for large commercial feedlots
  • Install in fence line or open lots
  • Recessed drain provides flushing action for automatic cleaning
  • Heavy-duty construction
  • Spray on insulation for better R-value
  • Powder coat paint

Click to enlarge

F-52

Item no. 40805

  • 855 watts
  • 17”W x 26”H x 28”L
  • Weight 160 lbs
  • Capacity 50 cattle/100 hogs
  • Popular size model for medium size cattle/hog operation
  • Big valve provides fast recovery in cattle trough
  • Heavy-duty construction
  • Large access door
  • Lids can be closed at night to save energy
  • Spray on insulation for better R-value
  • Powder coat paint

Click to enlarge
 
Click to enlarge

F-100

Item No. 40755

  • 1140 watts
  • 19-1/2”W x 16-1/4”H x 108”L
  • Weight 219 lbs
  • Capacity 450 head
  • Franklin’s largest waterer
  • Designed for large commercial feedlots/dairies
  • Install in fence line or open lots
  • Recessed drain provides flushing action for automatic cleaning
  • Heavy-duty construction
  • Spray on insulation for better R-value
  • Powder coat paint

More choices are available, just takes some web surfing. Thursday is our last look at cattle equipment.

Comments are closed.